| Customization: | Available |
|---|---|
| Material: | Stainless Steel |
| Connection Form: | Thread |
|
Still deciding? Get samples of US$ 1.5/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Stainless steel valve is made of stainless steel. It is usually used in occasions where the working medium is corrosive. It is a control component in the pipeline fluid transmission system. It is used to change the channel section and medium
Flow direction, with the functions of diversion, cut-off, regulation, throttling, check, diversion or overflow pressure relief.
It is widely used in chemical industry, petrochemical industry, petroleum, papermaking, mining, electric power, liquefied gas, food, pharmacy and water supply
Drainage, municipal and mechanical equipment
characteristic
1. Stainless steel valves are made of stainless steel raw materials. Compared with other valves, this kind of valve has good quality and resistance to corrosion Highly corrosive. Not simple rust. Therefore, many geothermal projects that need to be buried underground are generalized It is a valve made of stainless steel. The quality is guaranteed.
2. Made of stainless steel, with good corrosion resistance, rubber seal, good water stop performance and adaptability to channel depth Strong.
3. The use of stainless steel valves can also ensure that water resources are clean and free from pollution. Use of other raw materials The valve simply reflects other chemical attacks, such as copper reacts with oxygen in the air to produce oxidation,
It evaporated.
4. The use of stainless steel valves can reduce the welding points of water pipes and save materials. Applicable scope of stainless steel ball valve Wide circumference, diameter from small to a few millimeters, up to a few meters, from high vacuum to high pressure.
Raw material
| ITEM | DESIGNATION | QTY | MATERIAL |
| 1 | HANDLE SLEEVE | 1 | PVC |
| 2 | HANDLE | 1 | 304 |
| 3 | GLAND NUT | 1 | 304 |
| 4 | STEM NUT | 2 | 304 |
| 5 | SPRING WASHER | 1 | 304 |
| 6 | STEM PACKING | 1 | PTFE |
| 7 | THRUST WASHER | 2 | PTFE |
| 8 | JOINT GASKET | 1 | PTFE |
| 9 | CAP | 1 | CF8/CF8M |
| 10 | BODY | 1 | CF8/CF8M |
| 11 | BALL SEAT | 2 | PTFE |
| 12 | BALL | 1 | CF8/CF8M |
| 13 | STEM | 1 | 304/316 |
Size
| SIZE | D | L | H | W | S |
| 1/4" | 11.6 | 48.5 | 48 | 91 | 19 |
| 3/8" | 12.5 | 48.5 | 48 | 91 | 21 |
| 1/2" | 15 | 58 | 52 | 103 | 25.5 |
| 3/4" | 20 | 65 | 61 | 111 | 31 |
| 1" | 25 | 77 | 65 | 126 | 37.5 |
| 1-1/4" | 32 | 90 | 79 | 154 | 46.5 |
| 1-1/2" | 38 | 98 | 83 | 154 | 53.5 |
| 2" | 50 | 121 | 97 | 192 | 66 |
| 2-1/2" | 64 | 145 | 129 | 246 | 82.5 |
| 3" | 76 | 166 | 138 | 246 | 97.5 |
| 4" | 94 | 240 | 175 | 317 | 130 |
Why choose us
We control the material of PTFE and stainless steel wires per customer's request.
Some are from Japan and Taiwan, some are from China local. Only choose high quality material.
We test leakage of each roll before braiding, then we cut 300mm and crimp it to test
burst pressure after brading.
We use CNC Lathes Machine for end fittings production. Machine system, knife and inspection
tools are all imported from Japan.
We use Techmaflex Crimping Machine which is imported from France. This machine has
accurate and stable performance for crimping because it is produced for PTFE hose crimping only.
Contact to this supplier
http://xbvalve.en.made-in-china.com xbvalve.en.made-in-china.com
){kind=link}