| Media: | Gas |
|---|---|
| Material: | Stainless Steel |
| Connection Form: | Thread |
| Driving Mode: | Manual |
| Channel: | Straight Through Type |
| Structure: | Floating Ball Valve |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier N16 PN40 DIN flanged RF Floating ball type Stainless Steel 3PC wcb flanged Cantonese Ball Valve
The working principle of the Canton style ball valve
1. Opening process 1. In the closed position, the ball is pressed against the valve seat by the [wiki] mechanical [/wiki] of the valve stem. 2 When the handwheel is turned counterclockwise, the valve stem moves in the opposite direction, and the angular plane at the bottom causes the ball to separate from the valve seat. 3 The valve stem continues to lift and interacts with the guide pin in the spiral groove of the valve stem, so that the ball begins to rotate without friction. 4 Until it reaches the fully open position, the valve stem is raised to the limit position, and the ball rotates to the fully open position.
2. Closing process 1. When closing, turn the handwheel clockwise, the valve stem begins to descend and the ball leaves the valve seat and starts to rotate. 2 Continue to rotate the handwheel, the valve stem is acted on by the guide pin embedded in the upper spiral groove, so that the valve stem and the ball rotate 90° at the same time. 3 When it is about to close, the ball has rotated 90° without contact with the valve seat. 4 In the last few turns of the handwheel, the angular plane at the bottom of the valve stem mechanically wedges and presses the ball, making it tightly pressed against the valve seat to achieve a complete seal.type: threaded end, flanged end
material: ss 304/ ss 304l/ ss 316/ ss316l
working pressure: 1000 wog for 2-pc ball valve threaded end
pn 16, 150lbs/ 300lbs, jis 10k/20k for 2-pc ball valve flanged end
bore type: full bore
threaded end: npt, bspt, din 2999
mounting pad: optional
operator: optional lock device handle.
| Part Name | Material | ||
| Body/Bonnet | WCB | LCB | CF8/CF8M |
| Ball | A105/F304/F316 | F304/F316 | F304/F316 |
| Stem | F6A/F304/F316 | F304/F316 | F304/F316 |
| Seat Ring | PTFE/R-PTFE/A105/F304/F316 | ||
| Gasket | 304 + Flexible Graphite | ||
| Packing | PTFE | ||
| Bolts | B7 | B7 | B8 |
| Nuts | 2H | 4 | 8 |
Stainless Steel ANSI 150/300/600 Wcb Rising Stem Gate Valve
| DN | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 500 | |
| 1.5" | 2" | 2.5" | 3" | 4" | 5" | 6" | 8" | 10" | 12" | 14" | 16" | 20" | ||
| L | 140 | 150 | 170 | 180 | 190 | 200 | 210 | 230 | 250 | 270 | 290 | 310 | 350 | |
| H | 255 | 247 | 276 | 293 | 334 | 448 | 448 | 549 | 617 | 724 | 830 | 890 | 1000 | |
| D(PN10) | 150 | 165 | 185 | 200 | 220 | 250 | 285 | 340 | 395 | 445 | 505 | 565 | 570 | |
| D(PN16) | 150 | 165 | 185 | 200 | 220 | 250 | 285 | 340 | 405 | 460 | 520 | 580 | 715 |
Brass Valve Body: High-density forging, no blister, no air holes, no leakages. Made by special high precision CNC machines.
Brass Bonnet: High-density forging, no blister, no air holes, no leakages. Made by special high precision CNC machines.
Valve Ball:Smooth and wear resisting, with good sealing performance.
Brass Valve Stem: Made of hot rolled brass, high tensile strength, good toughness, long-term use without deformation, fracture.
Ball Seat: Made by pure PTFE(polytetrafluoroethylene), with high elasticity and wear resistance, is not easy aging.
Handle: Plated with dacromet, the surface is coated against corrosion, the coating is thickened, the thickness is up to 1.3mm, comfortable using.
O-ring: made of imported raw material,special for gas, small friction coefficient, long service life and not easy to leak.
Stainless Steel Lock screw: Internal design of anti-loose, can be used for long time.
Why choose us
We control the material of PTFE and stainless steel wires per customer's request.
Some are from Japan and Taiwan, some are from China local. Only choose high quality material.
We test leakage of each roll before braiding, then we cut 300mm and crimp it to test
burst pressure after brading.
We use CNC Lathes Machine for end fittings production. Machine system, knife and inspection
tools are all imported from Japan.
We use Techmaflex Crimping Machine which is imported from France. This machine has
accurate and stable performance for crimping because it is produced for PTFE hose crimping only.
Contact to this supplier
http://xbvalve.en.made-in-china.com xbvalve.en.made-in-china.com
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}